THE STRONGEST, FASTEST, AND EASIEST ALUMINUM FABRICATION NO EXPENSIVE EQUIPMENT REQUIRED!
Introducing The Simplest Way To Weld Aluminum Parts – No More Expensive Equipment Required! All You Need are someAlumifix Solution Welding Flux-Cored Rods. They arehigh-quality special rodsthat are mainlyused for welding/brazing aluminum and aluminum alloys. They can also beused for hard welding non-ferrous metals other than stainless steel.
No fluxes/fumes required!These welding rods make a sound joint, stronger than the parent metal and can join thin and thick parts together.
DOES THE IMPOSSIBLE. The rods make a sound joint with slight penetration to the base metal that is stronger than mild steel. Join thick or thin parts with 45,000 lb tensile strength.
EXTREME PERFORMANCE BY DESIGN. Solution Welding Rods are engineered to easily flow under a very low working temperature to ensure fast application to your project with minimal distortion.
USER-FRIENDLY. Regardless of your prior experience, anyone can weld aluminum without the need for expensive equipment like welding machines. All you need is a simple propane torch and some easy welding rods.
WIDE APPLICATION. Recommended for welding aluminum alloys: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005 and cast alloys 710.0 and 711.0. These welding rods can be used for cargo areas, loading ramps, docks, diamond plates, irrigation lines, engine blocks, gearboxes, etc.
HOW TO USE
Thoroughly clean the area you’re about to weld by brushing the base with a stainless steel brush until it becomes shiny.
Evenly heat the area to be welded.
As you heat, rub the rod vigorously against the heated area until the rod starts flowing.
Melting point:about 230℃
Diameter:1.6mm , 2mm
1 set ofAlumifix Solution Welding Flux-Cored Rods(5/10/20/50 pcs.)
choosing a selection results in a full page refresh